Product Description & Directions for Use:

A concentrated defoaming agent for the control of foam in hot water extraction

machines. Liquid Defoamer is designed to prevent oversudsing caused by

shampoo, soap and spotting agent residues and can be used in all types of

extraction cleaning equipment.

For professional and industrial use only.

Shake well before use.

Add 20ml. of Liquid Defoamer concentrate per 10 litres of recovery tank

capacity (1 to 500).

Mix the required amount of concentrate in a small amount of water and feed

this solution into the vacuum hose, with the vacuum motor switched on.

For upright extraction machines with no vacuum hose, add pre-diluted Liquid

Defoamer directly to the waste recovery tank. Repeat above methods of

defoaming after every emptying of the waste recovery tank.

Do not add Defoamer to the cleaning solution.

Do not apply Defoamer directly to the carpet.

For excessive foam, increase the amount of Liquid Defoamer required.

• Professional anti-foam concentrate for carpet hot water extraction machines.

• Contains high concentrate of powerful silicone emulsion which counteracts foam from previous shampoo residues.

• White liquid with mild odour.

pH Concentrate: 8.0

pH Diluted: 8.0

Contains 2-Octyl-2H-isothiazol-3-one. May produce an allergic reaction.

Keep out of the reach of children.

Do not get in eyes, on skin, or on clothing.

Wear protective gloves.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue

rinsing. Get medical advice / attention.